In this paper, the contact parameters of beach sand are calibrated based on the discrete element method and the optimal design method, and the obtained parameters by calibration are used as input for the angle of repose simulation. The relative error between angle of repose simulation results and experimental results is 3.27%. Based on the penetration and shear tests, simulation models were constructed to study the pressure shear failure mechanism of beach sand under high-speed conditions. The high-speed penetration simulation shows that with the increase of the penetration rate, the influence area of the sinkage plate gradually increases, and the stress of sand particles also increases. When the penetration rate increased from 0.5 m/s to 8 m/s, the pressure on the plate increased 12.7 times, indicating that the bearing capacity of the sand increased significantly with the increase of the penetration rate. The high-speed shear simulation shows that in the stable shear stage, the average shear torque initially increases slightly with the increase of speed, and then decreases significantly when the speed exceeds 4 m/s. This is because as the shear rate increases, the disturbance of the soil by the shear plate increases, the velocity of soil particles increases, resulting in a decrease in the number of soil particles in contact with the shear plate, thereby reducing the shear torque. [ABSTRACT FROM AUTHOR]

Copyright of Materials (1996-1944) is the property of MDPI and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)