dielectric losses, dielectric materials, dielectric thin films, materials preparation, polymer films, polymerisation, Materials of engineering and construction. Mechanics of materials, TA401-492

Abstract A series of siloxane‐containing polyimide films (PIS) were prepared by copolymerising with rigid aromatic dianhydride, siloxane diamines and six different aromatic diamines. The effects of siloxane structures, fluorine and imide content, rigid or flexible segment on the heat resistance, moisture absorption, dielectric performance, mechanical and bonding properties were systematically studied. The results show that PIS films maintain good heat resistance with Tg between 292 and 420°C and 5% weight loss temperature higher than 500°C. The moisture absorption and dielectric constant can be significantly reduced due to the presence of siloxanes and fluorinated groups, with the absorption rate as low as 1.2% and dielectric constant of 2.85 at 1 MHz. When measured at 10 GHz, the dielectric constant ranges from 3.10 to 3.50, and dielectric loss varies from 0.0059 to 0.0098. The PIS‐6 film has the best comprehensive performance due to the low imide content, introduction of trifluoromethyl and ether bonds. The peeling strength of bonding PIS‐6 film with a copper foil can reach 9.2 N/cm. It is proven that siloxane‐containing PIS films with high heat resistance, low dielectric and outstanding adhesion are achieved, which can be applied for flexible integrated circuit boards, high‐frequency electronics and microelectronics fields.